October 10, 2023

Metal Barn Roof Styles – Simplifying Your Buying Process

Metal Barn Roof Styles - Simplifying Your Buying Process

A metal barn is a perfect solution when it comes to storing your farm vehicles or sheltering your livestock. But choosing which metal roof panel will best fit your bill is a bit tricky. So, what do you do, randomly pick one, or just go with what the metal dealer says?

Selecting the correct roof is extremely vital, as 25% of the heat loss occurs via the roof. New federal income tax credits are available until 2032, offering up to $3,200 a year to reduce the cost of energy-efficient home upgrades by up to 30%.

No doubt, there are metal roofs that are best for certain climates, and then there are ones that are more affordable than others. So, which metal roof is best for your metal barn? That’s what we are going to discuss here.

Types Of Metal Barn Roof Styles:

Flat Roof

  • As the name suggests, these are flat metal panels installed on top.
  • These are the cheapest options.
  • Usually, these are good for small garden sheds or places with fair climate throughout the year. Viking Barns does not recommend this as a metal barn roof style.

Regular Roof

  • An A-frame metal roof with a slightly curved edge.
  • It has a traditional appearance.
  • It is not recommended for a metal barn, though.

Horizontal Or A-frame Or Boxed Eave Roof

  • The second most popular roof style is boxed eaves.
  • It has horizontal ridges that run parallel to the ground.
  • Items like dead leaves, twigs, or tree branches might get stuck into the ridges and, over time, may scratch the roof surface, and moisture builds up.
  • It gives a typical barn look.
  • These are good for moderate climates.

Vertical Roof

  • A vertical roof is one of the best options and the sturdiest structures available in the market.
  • It has vertical ridges that run perpendicular to the ground.
  • Almost every piece of debris slides off the surface due to gravity.
  • It has a modern appeal to it.
  • These are recommended for harsh weather.

Note: There are other roof options that are just the combination of two or more roof types mentioned above. Such examples are – hipped, gable, cross-hipped, cross-gable, gambrel, mansard, pyramid hip, intersecting or overlaid hip, hexagonal, dormer, etc.

Additional Features Of Metal Building Roof Styles:

Trim

It is used in the area where two metal roof panels meet. Its job is to seal the joints to prevent moisture damage. It is a necessary feature.

Gutter & Downspout

A gutter redirects water from the top to the ground via the downspout. If you don’t add this feature, water will pour over anyone entering or leaving the metal barn.

Ridge Cap

It is added at the top of the metal panel to cover the pitched roof. This makes the whole structure weatherproof.

Roof Vents

It allows air to flow in and out of the metal barn. The most common vent used in almost every house is a chimney.

Which Gauge Is Best For A Metal Barn’s Roof?

You can get metal roof panels in different thicknesses. Choosing a metal panel gauge should be the last option, as it may have already been determined based on your other choices. The higher the gauge number, the thinner the panel becomes. Below are some commonly used panel thicknesses. Check them out.

22-gauge

  • It is the thickest sheet.
  • It offers the best protection against extreme weather events.
  • It is the most durable & resilient roof option.
  • It is usually expensive.

24-gauge

  • It is a thick panel.
  • It safeguards from high winds & rain.
  • It is another durable option.
  • These are expensive too.

26-gauge

  • These are industrial standard gauge options.
  • Most residential & industrial units generally prefer it.
  • It is less expensive than a 22 or 24-gauge panel.

29-gauge

  • It is the slimmest metal panel.
  • It is a good option for small metal building roof styles.
  • It is one of the cheapest options you can have.

Which Metal Barn Roof Style Is The Best Fit For You?

Several factors come into play when deciding on the type of roofing to install. Some of them are as follows –

Local Building Codes

In some places such as Florida, Texas, etc., your local authority may ask you to build a specific type of roof for safety reasons. That would just cut short all the research to do. Following building codes and guidelines is mandatory as it may lead to the removal of the structure entirely or a hefty fine.

Local Weather Conditions

In case there is no restriction from your zone, you would still want to invest in a sturdy structure. Hence, a vertical roof would be the best choice for the harshest climate, like tornadoes or hurricanes.

Your Budget

A relevant question is how much you want to spend on your metal barn. Whether you prefer to stick with an affordable solution or you want to splurge a little on structural integrity, the choice is yours.

What Is The Cost Of Installing Various Metal Barn Roof Styles?

On average, a metal roof can cost between $9,150 to $16,743. We know that’s a lot of money, but a metal panel is better at durability, energy efficiency, and long-lasting. They have a higher return on investment.

A corrugated (wavy structures) metal roof can cost roughly $3.50 to $6.50 per sq. ft. They are affordable and can overall range from $10,500 to $19,500. You can choose corrugated aluminum, galvalume steel, galvanized steel, copper, stainless steel, etc., as an option for metal roofing.

Following is the list of prices as per type of metal, in case you are interested.

Metal Type Price per sq. ft.
Galvalume steel $4 to $9
Galvanized steel $4.50 to $17
Aluminum $6.50 to $21
Stainless steel $7 to $20
Copper $20 to $40

You can generally pay $2 to $14 per square foot for labor charges. As of 2023, the cost of a metal roof is $23.81 to $43.42 per square foot for metal roof raw materials.

In Light Of These Facts:

Metal barns are your best companion for life. They will stay intact with time. No more rotting posts and high expenses for upkeep with metal barn. Get on the steel board. Call Viking Barns & book your steel barn today. Meanwhile, you may want to inquire with customer support about any current exclusive offers available.

Choosing a metal roof can be a daunting task if you are doing it for the first time. That’s why Viking Barns has their best engineering team available for you to guide you when selecting your roof style. So, call today!

Similar Blogs

Innovative Uses Of Metal In Construction: From High-Rises To Barn Conversions
March 31, 2025

Innovative Uses Of Metal In Construction: From High-Rises To Barn Conversions

Discover how durable, customizable metal barns can transform your farm & ranch operations. Learn about their unmatched strength, weather resistance, and fire safety.
Why Commercial Metal Buildings Are A Smart Investment For North Carolina Businesses
March 21, 2025

Why Commercial Metal Buildings Are A Smart Investment For North Carolina Businesses

Looking to invest in your business in North Carolina? Explore how metal buildings can combat NC weather patterns & provide a reliable solution to your business needs, whether small or big.
How A 44x40 Step Down Barn Can Improve Your Farm Operations
March 13, 2025

How A 44x40 Step Down Barn Can Improve Your Farm Operations

Find out the answers, practical uses, and benefits of a 44x40 metal barn building for farm and ranch owners.
Choose The Right Dimensions For Your Custom Steel Barn
March 4, 2025

Choose The Right Dimensions For Your Custom Steel Barn

Explore various steel barn dimensions & learn about how to calculate the right size for your farm barn, ranch, or agribusiness operations.
Single Bubble vs. Double Bubble vs. Woven R-17 Insulation: What Works Better?
February 25, 2025

Single Bubble vs. Double Bubble vs. Woven R-17 Insulation: What Works Better?

Compare Single Bubble, Double Bubble, and Woven R-17 insulation to find out which offers the best performance and value for your needs.
Huge Discounts on Metal Structures with Tax Saving Sale
February 18, 2025

Huge Discounts on Metal Structures with Tax Saving Sale

Get huge discounts on metal structures during the Tax Saving Sale. Save big on durable, custom-built buildings & take benefit of tax saving.
Different Types Of Metal Barn Anchors And When To Use Them
February 13, 2025

Different Types Of Metal Barn Anchors And When To Use Them

Learn about different types of metal barn anchors, their uses, and how they enhance stability against wind, snow, and seismic activity.
26-Gauge or 29-Gauge: Choosing the Right Gauge for Your Metal Barn Roof
February 5, 2025

26-Gauge or 29-Gauge: Choosing the Right Gauge for Your Metal Barn Roof

Choose between 26-gauge and 29-gauge metal for your barn roof based on durability & budget. 26-gauge offers better strength, while 29-gauge is cost-effective.
Set-up Your Own Hen Farm With a 60x61 Metal Barn
January 30, 2025

Set-up Your Own Hen Farm With a 60x61 Metal Barn

Start your own hen farm with a durable 60x61 metal barn that is spacious, weatherproof, and protects your poultry year-round.
Why Prefabricated Horse Barns Are Best For Equestrian Facilities
January 22, 2025

Why Prefabricated Horse Barns Are Best For Equestrian Facilities

Discover the reasons why metal horse barns are the best shelter for your horses & its performance-centric structure that resists pests, external weather and maintains its structural strength with time.